Kicker 12″ SoloX with Ported Subwoofer Enclosure

Description

This bundle includes a Kicker 49VUL7X12 SOLOX 12″ Single Unloaded Enclosure, and a Kicker 49L7X121 – SoloX L7X 12-Inch (30cm), 3″ Coil, Ferrite Competition Subwoofer, 1-Ohm.

1x Kicker 49VUL7X12 SOLOX 12″ Single Unloaded Enclosure – (49VUL7X12)

It’s a KICKER first, and only KICKER can provide the factory-tuned bulk to house SoloX! Pre-wired, terminals… just put the sub in the hole and connect!
OPTIMIZED
These are rock-solid and optimized for SoloX max performance. Ready for pounding once the subwoofer is installed.
TUNED FOR MAX SPL OUTPUT
The 12-inch enclosures are tuned at 31Hz for max SPL output at the most desired frequency. All you need is the L7X12 sub!
MASSIVE FLARED PORT
They include a double-layered baffle with extensive internal bracing and a huge, front-facing flared port for controlled air velocity.
DID SOMEONE SAY BIRCH?
They’re constructed from heavy-duty birch plywood with 45-degree corner bracing, large brass lugs in the terminal cup, and extra-large mounting feet.

1x Kicker 49L7X121 – SoloX L7X 12-Inch (30cm), 3″ Coil, Ferrite Competition Subwoofer, 1-Ohm – (49L7X121)

The KICKER SoloX L7X Ferrite Competition Subwoofer brings the most advanced bass technology and unprecedented performance, from the guys who invented it for a vehicle. A motor like no other – it includes a massive, triple-stacked ferrite magnet surrounding a hyper-extended pole piece, engineered for an enormous, more linear magnetic field and amazing heat dissipation. It’s ultra-deep bass at very high volume. L7X’s three-inch voice coil is supported by a dual-spider suspension system, and the double-pressed pulp cone is attached to an ultra-long-throw Santoprene surround – equipped with KICKER’s square cone tech and ribbed corners for continuous force and air movement. Field-Replaceable Recone Kit – Using an exclusive, surround compression system, bolt-on spider landing, and helpful alignment shims, repairing an L7X is no sweat! Features: • Field-Replaceable Recone Kit – cone/voice coil/spider assembly, and no gluing required
• Forced Air Cooling™
• Three-inch, aluminum voice coil former
• Dual-spider suspension
• Double-pressed pulp cone
• Heavy-duty UV-resistant Santoprene surround
• Custom rubber magnet boot
• Cast-aluminum basket
• Single 8 AWG terminal and dual 8 AWG terminal block
• Triple-Stacked Ferrite Magnet
Specifications:
• Size (in, cm) – 12, 30
• Rated Impedance (Ohms) – 1 DVC
• Rec Amp Power rms – 1000-2000
• Frequency Response – 20-100
• Magnet Diameter (in, cm) – 8-11/16, 22
• Total Magnet Weight (oz, kg) – 406, 11.5
• Voice Coil Diameter (in, mm) – 3, 75
• Voice Coil Winding Width (in, mm) – 2.5, 62.5
• Top Plate Thickness (in, mm) – 0.5, 13
• Xmax (in, mm) – 1.25, 31.25
• Mounting Cutout (in, cm) – 11-1/16, 28.1
• Mounting Depth (in, cm) – 10-1/8, 25.7
• Recommended Vented Box Volume (Cu. Ft., L) – 3, 84.9
• Port Opening (in x in, cm x cm) – 3.5 x 13, 9 x 33
• Port Length (in, cm) – 36.5, 93
• Vented Enclosure Tuning Frequency (Hz) – 31